Please select and order
€219.54
excl. VAT
Add to cart
Norm

ÖNORM EN ISO 15494

Issue date: 2021 05 01

Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015 + Amd 1:2020) (consolidated version)

This International Standard specifies the characteristics and requirements for components such as pipes, fittings, and valves made from one of the following materials in...
Valid
Publisher:
Austrian Standards International
Format:
Digital | 117 Pages
Language:
German | English | Download GER/ENG
This International Standard specifies the characteristics and requirements for components such as pipes, fittings, and valves made from one of the following materials intended to be used for thermoplastics piping systems in the field of industrial applications above and below ground: — polybutene (PB); — polyethylene (PE); — polyethylene of raised temperature resistance (PE-RT); — crosslinked polyethylene (PE-X); — polypropylene (PP). This International Standard is applicable to either PB, PE, PE-RT, PE-X, or PP pipes, fittings, valves, and their joints and to joints with components of other plastics and non-plastic materials, depending on their suitability, intended to be used for the conveyance of liquid and gaseous fluids as well as solid matter in fluids for industrial applications such as the following: — chemical plants; — industrial sewerage engineering; — power engineering (cooling and general purpose water); — mining; — electroplating and pickling plants; — semiconductor industry; — agricultural production plants; — fire fighting; — water treatment; — geothermal. National regulations in respect of fire behaviour and explosion risk are applicable. The components have to withstand the mechanical, thermal, and chemical demands to be expected and have to be resistant to the fluids to be conveyed. Characteristics and requirements which are applicable for all materials (PB, PE, PE-RT, PE-X, or PP) are covered by the relevant clauses of this International Standard. Those characteristics and requirements which are dependent on the material are given in the relevant normative annex for each material. Components conforming to any of the product standards listed in the bibliography or with national standards, as applicable, may be used with components conforming to this International Standard, provided that they conform to the requirements for joint dimensions and to the relevant requirements of this International Standard.
ÖNORM EN ISO 15494
2021 05 01
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethyle...
Norm
ÖNORM EN ISO 15494
2019 04 15
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethyle...
Norm
ÖNORM EN ISO 15494
2016 03 01
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethyle...
Norm
ÖNORM EN ISO 15494
2004 02 01
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypro...
Norm
Expand
Norm
ISO 7-1:1994
Issue date : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 179-2:2020
Issue date : 2020 05 14
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
Norm
ISO 1133-1:2011
Issue date : 2011 11 28
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
Norm
ISO 1167-1:2006
Issue date : 2006 01 30
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
Norm
ISO 1167-2:2006
Issue date : 2006 01 30
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
Norm
ISO 1167-3:2007
Issue date : 2007 10 30
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
Norm
ISO 1167-4:2007
Issue date : 2007 10 30
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies
Norm
ISO 1183-1:2019
Issue date : 2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method (Corrected version 2019-05)
Norm
ISO 1183-2:2019
Issue date : 2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
Norm
ISO 2505:2005
Issue date : 2005 05 25
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
Norm
ISO 3126:2005
Issue date : 2005 03 16
Plastics piping systems — Plastics components — Determination of dimensions
Norm
ISO 4065:2018
Issue date : 2018 01 15
Thermoplastics pipes — Universal wall thickness table (Corrected version 2019-12)
Norm
ISO 4437-2:2014
Issue date : 2014 01 13
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes
Norm
ISO 6964:2019
Issue date : 2019 02 27
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
Norm
ISO 9080:2012
Issue date : 2012 10 11
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
Norm
ISO 10147:2011
Issue date : 2011 08 30
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
Norm
ISO 11357-6:2018
Issue date : 2018 03 09
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
Norm
ISO 11922-1:2018
Issue date : 2018 01 08
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
Norm
ISO 12162:2009
Issue date : 2009 10 27
Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
Norm
ISO 13477:2008
Issue date : 2008 03 20
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
Norm
ISO 13478:2007
Issue date : 2007 08 08
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
Norm
ISO 13760:1998
Issue date : 1998 05 14
Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage
Norm
ISO 14531-1:2002
Issue date : 2002 12 09
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes (Corrected version 2003-10)
Norm
ISO 15512:2019
Issue date : 2019 04 30
Plastics — Determination of water content
Norm
ISO 15853:1999
Issue date : 1999 11 25
Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
Norm
ISO 16135:2006
Issue date : 2006 03 14
Industrial valves — Ball valves of thermoplastics materials
Norm
ISO 16136:2006
Issue date : 2006 03 14
Industrial valves — Butterfly valves of thermoplastics materials
Norm
ISO 16137:2006
Issue date : 2006 03 14
Industrial valves — Check valves of thermoplastics materials
Norm
ISO 16138:2006
Issue date : 2006 03 14
Industrial valves — Diaphragm valves of thermoplastics materials
Norm
ISO 16139:2006
Issue date : 2006 03 14
Industrial valves — Gate valves of thermoplastics materials
Norm
ISO 16871:2003
Issue date : 2003 05 20
Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
Norm
ISO 18553:2002
Issue date : 2002 03 28
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
Norm
ISO 21787:2006
Issue date : 2006 03 14
Industrial valves — Globe valves of thermoplastics materials
Norm
ISO 4427-1:2007
Issue date : 2007 07 31
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
Norm
ISO 15494:2015
Issue date : 2015 09 29
Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system