Please select and order
€372.30
excl. VAT
Add to cart
Norm

ÖNORM EN ISO 11960

Issue date: 2014 03 01

Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014)

This International Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory m...
Withdrawn: 2021 08 01
This International Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this International Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H. For pipes covered by this International Standard, the sizes, masses and wall thicknesses, as well as, grades and applicable end-finishes are listed in Tables C.1 and C.2 and Tables E.1 and E.2. By agreement between the purchaser and manufacturer, this International Standard can also be applied to other plain-end pipe sizes and wall thicknesses. This International Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this International Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H. For pipes covered by this International Standard, the sizes, masses and wall thicknesses, as well as, grades and applicable end-finishes are listed in Tables C.1 and C.2 and Tables E.1 and E.2. By agreement between the purchaser and manufacturer, this International Standard can also be applied to other plain-end pipe sizes and wall thicknesses.
ÖNORM EN ISO 11960
2021 08 01
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:...
Norm
ÖNORM EN ISO 11960
2014 03 01
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:...
Norm
ÖNORM EN ISO 11960
2011 09 01
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:...
Norm
ÖNORM EN ISO 11960
2005 03 01
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:...
Norm
ÖNORM EN ISO 11960
1998 04 01
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:...
Norm
Expand
Norm
ISO 80000-1:2009
Issue date : 2009 11 17
Quantities and units — Part 1: General
Norm
ISO 643:2012
Issue date : 2012 12 10
Steels — Micrographic determination of the apparent grain size
Final Draft
ISO/FDIS 643
Issue date : 2015 04 02
Steel — Micrographic determination of the apparent grain size
Norm
ISO 6506-1:2014
Issue date : 2014 09 25
Metallic materials — Brinell hardness test — Part 1: Test method
Norm
ISO 6506-2:2014
Issue date : 2014 09 25
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
Norm
ISO 6508-1:2015
Issue date : 2015 02 25
Metallic materials — Rockwell hardness test — Part 1: Test method
Norm
ISO 6508-2:2015
Issue date : 2015 02 25
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
Norm
ISO 6892-1:2009
Issue date : 2009 08 14
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
Draft
ISO/DIS 6892-1
Issue date : 2014 04 24
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
Norm
ISO 7500-1:2004
Issue date : 2004 08 13
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
Norm
ISO 9513:2012
Issue date : 2012 11 30
Metallic materials — Calibration of extensometer systems used in uniaxial testing (Corrected version 2012-11)
Technische Regel
ISO/TR 9769:1991
Issue date : 1991 10 24
Steel and iron — Review of available methods of analysis
Technische Regel
ISO/TR 10400:2007
Issue date : 2007 12 13
Petroleum and natural gas industries — Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
Norm
ISO 10893-2:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
Norm
ISO 10893-3:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
Norm
ISO 10893-5:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
Norm
ISO 10893-10:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
Norm
ISO 10893-11:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
Norm
ISO 11484:2009
Issue date : 2009 02 12
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel
Norm
ISO 13678:2010
Issue date : 2010 11 26
Petroleum and natural gas industries — Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
Norm
ISO 15156-2:2009
Issue date : 2009 10 14
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
Final Draft
ISO/FDIS 15156-2
Issue date : 2015 04 23
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
Norm
ISO/IEC 17011:2004
Issue date : 2004 09 07
Conformity assessment — General requirements for accreditation bodies accrediting conformity assessment bodies (Corrected version 2005-02)
Norm
ISO/IEC 17025:2005
Issue date : 2005 05 12
General requirements for the competence of testing and calibration laboratories (Corrected version 2005-05)
Norm
ISO 6508-2:2015
Issue date : 2015 02 25
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
Norm
ISO 6892-1:2019
Issue date : 2019 11 15
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
Norm
ISO 7500-1:2018
Issue date : 2018 02 07
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
Technische Regel
ISO/TR 9769:2018
Issue date : 2018 12 13
Steel and iron — Review of available methods of analysis
Technische Regel
ISO/TR 10400:2018
Issue date : 2018 08 31
Petroleum and natural gas industries — Formulae and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
Norm
ISO 10893-2:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
Norm
ISO 10893-3:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
Norm
ISO 10893-5:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
Norm
ISO 10893-10:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
Norm
ISO 10893-11:2011
Issue date : 2011 03 24
Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
Norm
ISO 11484:2019
Issue date : 2019 04 01
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel
Norm
ISO 13678:2010
Issue date : 2010 11 26
Petroleum and natural gas industries — Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
Norm
ISO 15156-2:2020
Issue date : 2020 11 17
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
Norm
ISO/IEC 17011:2017
Issue date : 2017 11 29
Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies
Norm
ISO/IEC 17025:2017
Issue date : 2017 11 29
General requirements for the competence of testing and calibration laboratories (Corrected version 2017-11)
Norm
ISO 80000-1:2009
Issue date : 2009 11 17
Quantities and units — Part 1: General
Norm
ISO 6506-1:2014
Issue date : 2014 09 25
Metallic materials — Brinell hardness test — Part 1: Test method
Norm
ISO 6506-2:2017
Issue date : 2017 10 25
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
Norm
ISO 6508-1:2016
Issue date : 2016 08 08
Metallic materials — Rockwell hardness test — Part 1: Test method
Norm
ÖNORM EN ISO 11960
Issue date : 2021 08 01
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
Norm
ISO 11960:2014
Issue date : 2014 01 15
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells