ÖNORM EN 81-20

This document specifies the safety rules for permanently installed new passenger or goods passenger lifts, with traction, positive or hydraulic drive, serving defined landing levels, having a car designed for the transportation of persons or persons and goods, suspended by ropes, chains or jacks and moving between guide rails inclined not more than 15° to the vertical. In addition to the requirements of this document, supplementary requirements have to be considered in special cases (use of lifts by persons with disabilities, in case of fire, potentially explosive atmosphere, extreme climate conditions, seismic conditions, transporting dangerous goods, etc.). This standard does not cover: a) lifts with: 1) drive systems other than those stated in 1.1; 2) rated speed smaller than or equal to 0,15 m/s; b) hydraulic lifts: 1) with a rated speed exceeding 1 m/s; 2) where the setting of the pressure relief valve exceeds 50 MPa; c) new passenger or goods passenger lifts in existing buildings 1) where in some circumstances due to limitations enforced by building constraints, some requirements of EN 81-20 cannot be met and EN 81-21 should be considered; d) lifting appliances, such as paternosters, mine lifts, theatrical lifts, appliances with automatic caging, skips, lifts and hoists for building and public works sites, ships' hoists, platforms for exploration or drilling at sea, construction and maintenance appliances or lifts in wind turbines; e) important modifications to a lift installed before this standard is brought into application; f) safety during operations of transport, erection, repairs, and dismantling of lifts. However, this standard may usefully be taken as a basis. Noise and vibrations are not dealt with in this standard as they are not found at levels which could be considered as harmful with regard to the safe use and maintenance of the lift. 1.4 This standard is not applicable to passenger and goods passenger lifts, which are installed before the date of its publication.