Please select and order
€143.05
excl. VAT
Add to cart
Norm
ÖNORM EN 1825-1
Issue date: 2005 01 01
Grease separators - Part 1: Principles of design, performance and testing, marking and quality control
This standard specifies definitions, nominal sizes, principles of design, performance requirements, marking, testing
and quality control for grease separators.
This sta...
Valid
Publisher:
Austrian Standards International
Format:
Digital | 52 Pages
Language:
German
| English
| Download GER/ENG
Optionally co-design standards:
ICS
This standard specifies definitions, nominal sizes, principles of design, performance requirements, marking, testing
and quality control for grease separators.
This standard applies to separators for the separation of greases and oils of vegetable and animal origin from
wastewater by means of gravity and without any external energy.
This standard does not cover grease separators intended to treat domestic wastewater from kitchen areas of single
family dwellings, where the separator has a nominal size less than 1.
The standard is not applicable for the separation of light liquids, e.g. petrol, fuel and heating oil, and does not cover
the treatment of wastewater exclusively containing stable emulsions of greases and oils.
The standard does not cover the use of biological means (bacteria and enzymes).
ÖNORM EN 1825-1
2005 01 01
Grease separators - Part 1: Principles of design, performance and testing, marking and quality contr...
Norm
↖
Norm
Issue date :
2005 06 07
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
Norm
Issue date :
2005 10 25
Rubber, vulcanized — Determination of the effect of liquids (Corrected version 2006-02)
Norm
Issue date :
2007 06 11
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
Issue date :
1995 11 09
Structural steels — Plates, wide flats, bars, sections and profiles
Norm
Issue date :
2005 11 18
Petroleum products — Fuels (class F) — Specifications of marine fuels
Norm
Issue date :
1994 08 04
Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
Norm
Issue date :
2005 09 01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Norm
Issue date :
2005 09 01
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Norm
Issue date :
2001 05 01
Testing hardened concrete - Part 2: Making and curing specimens for strength tests
Norm
Issue date :
2008 10 01
Testing hardened concrete - Part 2: Making and curing specimens for strength tests
Norm
Issue date :
1995 01 01
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control
Norm
Issue date :
2007 09 01
Gully tops and manhole tops for vehicular and pedestrian areas
Norm
Issue date :
2007 05 01
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
Issue date :
1999 07 01
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods (includes amendment A1:1998)
Norm
Issue date :
1998 04 01
General requirements for components used in discharge pipes, drains and sewers for gravity systems
Norm
Issue date :
2008 07 01
General requirements for components used in drains and sewers
Norm
Issue date :
1998 04 01
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: ............(abbreviated)
Norm
Issue date :
1998 04 01
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta
Norm
Issue date :
1999 01 01
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
Norm
Issue date :
2003 09 01
Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001)
Norm
Issue date :
2005 02 01
Paints and varnishes - Standard panels for testing (ISO 1514:2004)
Norm
Issue date :
2004 03 01
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
Norm
Issue date :
2005 01 01
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
Norm
Issue date :
2005 02 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
Norm
Issue date :
2005 05 01
Plastics - Determination of flexural properties (ISO 178:2001 + Amd 1:2004) (consolidated version)
Norm
Issue date :
2008 09 01
Plastics - Determination of flexural properties (ISO/DIS 178:2008)
Norm
Issue date :
2007 06 01
Plastics - Determination of Izod impact strength (ISO 180:2000 + Amd . 1:2006) (consolidated version)
Norm
Issue date :
2007 08 01
Paints and varnishes - Cross-cut test (ISO 2409:2007)
Norm
Issue date :
2007 05 01
Paints and varnishes - Determination of film thickness (ISO 2808:2007)
Norm
Issue date :
2007 06 01
Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2007)
Norm
Issue date :
2003 10 01
Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
Norm
Issue date :
2008 07 01
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
Norm
Issue date :
2003 07 01
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002)
Norm
Issue date :
2004 01 01
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003)
Norm
Issue date :
2004 01 01
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003)
Norm
Issue date :
1996 07 01
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994)
Norm
Issue date :
1997 09 01
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
Norm
Issue date :
2007 10 01
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) (multilingual version)
Norm
Issue date :
2006 10 01
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2006)
Norm
Issue date :
2001 06 01
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2:2000)
Norm
Issue date :
2010 09 03
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
Issue date :
1995 11 09
Structural steels — Plates, wide flats, bars, sections and profiles
Norm
Issue date :
1994 08 04
Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
Norm
Issue date :
2005 06 07
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
Norm
Issue date :
2004 01 19
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
Norm
Issue date :
2004 07 14
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
Norm
Issue date :
2015 02 11
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
Norm
Issue date :
1976 04 01
Concrete tests — Dimensions, tolerances and applicability of test specimens
Norm
Issue date :
1978 11 01
Concrete — Determination of compressive strength of test specimens
Norm
Issue date :
2017 03 17
Petroleum products — Fuels (class F) — Specifications of marine fuels
