Please select and order
€268.58
excl. VAT
Add to cart
Norm
ÖNORM EN 16228-1
Issue date: 2014 11 15
Drilling and foundation equipment - Safety - Part 1: Common requirements
This European Standard specifies the common safety requirements for drilling and foundation equipment.
Part 1 of this European Standard deals with the significant hazard...
Withdrawn: 2022 06 15
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 167 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
This European Standard specifies the common safety requirements for drilling and foundation equipment.
Part 1 of this European Standard deals with the significant hazards common to drilling and foundation equipment, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping).
This document gives safety requirements for all types of drilling and foundation equipment and is intended to be used in conjunction with one of parts 2 to 7. These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of drilling and foundation equipment in question.
For multipurpose machinery, the parts of the standard that cover the specific functions and applications are used, e.g. a drilling machine also used as a piling machine will use the relevant requirements of EN 16228-1, EN 16228-2, and EN 16228-4.
The following machines are excluded from the scope of this standard:
- tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to prEN 16191;
- raise boring machines;
- drill rigs used in oil and gas industry.
Where a drilling or foundation equipment of fixed configuration that is not intended to be separated is assembled using a carrier based on earth-moving equipment, agricultural equipment, or a crane, then the completed assembly will conform to the requirements specified in this drilling and foundation equipment standard.
Drilling and foundation equipment within the scope of EN 16228 parts 1 to 6 may include interchangeable auxiliary equipment within the scope of EN 16228-7, either as an integral part of its construction or as interchangeably fitted equipment.
If drilling and foundation equipment is intended to be used in a potentially explosive atmosphere, additional requirements will need to be met which are not covered by this standard.
ÖNORM EN 16228-1
2022 06 15
Drilling and foundation equipment - Safety - Part 1: Common requirements
Norm
ÖNORM EN 16228-1
2014 11 15
Drilling and foundation equipment - Safety - Part 1: Common requirements
Norm
↖
Norm
Issue date :
2009 06 01
Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986 + Amd 1:1989)
Norm
Issue date :
2010 01 01
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
Norm
Issue date :
1997 02 01
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996)
Norm
Issue date :
2010 01 01
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
Norm
Issue date :
2009 06 01
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
Norm
Issue date :
2009 06 01
Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)
Norm
Issue date :
2010 10 01
Construction machinery - Electromagnetic compatibility of machines with internal power supply
Norm
Issue date :
2009 05 15
Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)
Norm
Issue date :
2011 01 01
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004 + Amd 1:2010) (consolidated version)
Norm
Issue date :
2009 03 01
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
Norm
Issue date :
2009 05 01
Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
Norm
Issue date :
2009 01 01
Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
Norm
Issue date :
2009 03 01
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
Norm
Issue date :
2008 10 01
Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)
Norm
Issue date :
2008 02 01
Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
Norm
Issue date :
2008 08 01
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
Norm
Issue date :
2009 09 01
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006 + Cor 1:2009) (consolidated version)
Norm
Issue date :
2011 11 01
Earth-moving machinery - Access systems (ISO 2867:2011)
Norm
Issue date :
2012 03 01
Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011)
Norm
Issue date :
2009 02 01
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
Norm
Issue date :
2009 12 01
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)
Norm
Issue date :
2011 03 01
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
Norm
Issue date :
2010 08 15
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
Norm
Issue date :
2011 03 01
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
Norm
Issue date :
2011 04 15
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
Norm
Issue date :
2013 10 15
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
Norm
Issue date :
2011 04 01
Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
Norm
Issue date :
2013 08 15
Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
Norm
Issue date :
2013 08 15
Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
Norm
Issue date :
2013 12 01
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
Norm
Issue date :
2013 10 15
Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)
Norm
Issue date :
1997 05 01
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements (Corrected version 1997-06)
Norm
Issue date :
1989 10 19
Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
Norm
Issue date :
2010 07 27
Cranes — Wire ropes — Care and maintenance, inspection and discard
Norm
Issue date :
2006 11 03
Earth-moving machinery — Operator's field of view — Test method and performance criteria
Norm
Issue date :
2004 11 12
Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols
Norm
Issue date :
2012 01 25
Graphical symbols for use on equipment — Registered symbols (Corrected version 2012-05)
Norm
Issue date :
2010 06 24
Earth-moving machinery — Machine-mounted audible travel alarms and forward horns — Test methods and performance criteria
Norm
Issue date :
2008 02 07
Earth-moving machinery — Crawler machines — Performance requirements and test procedures for braking systems
Norm
Issue date :
1995 12 27
Earth-moving machinery — Machine-mounted retrieval device — Performance requirements
Norm
Issue date :
2007 10 03
Earth-moving machinery — Hydraulic excavators — Lift capacity
Norm
Issue date :
2008 11 25
Earth-moving machinery — Laboratory tests and performance requirements for protective structures of excavators — Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t
Norm
Issue date :
1994 10 20
Earth-moving machinery — Operator station and maintenance areas — Bluntness of edges
Norm
Issue date :
2012 01 13
Earth-moving machinery — Safety requirements for remote operator control systems
Norm
Issue date :
2022 06 15
Drilling and foundation equipment - Safety - Part 1: Common requirements