Please select and order
€160.20
excl. VAT
Add to cart
Norm
ÖNORM EN 14411
Issue date: 2007 06 01
Ceramic tiles - Definitions, classification, characteristics and marking
This European Standard defines and gives terms, specifies requirements and marking criteria for ceramic tiles
(produced by extrusion and dry-pressing techniques) of the ...
Withdrawn: 2012 11 15
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 74 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
This European Standard defines and gives terms, specifies requirements and marking criteria for ceramic tiles
(produced by extrusion and dry-pressing techniques) of the best commercial quality (first quality).
Tiles not of first commercial quality are also covered following the provisions of Annex Q.
This European Standard does not cover tiles made by other than the normal processes of extrusion or drypressing
nor decorative accessories or trim (such as edges, corners, skirting, capping, coves, beads, steps,
curved tiles and other accessory pieces) or mosaics (i.e. any piece that can fit into a 7 cm × 7 cm area, see
custom nomenclature).
NOTE EN ISO 10545 describes the test procedures required to determine the product characteristics listed in
this European Standard. EN ISO 10545 is divided into parts, each describing a specific test procedure or related matter.
ÖNORM EN 14411
2016 11 01
Ceramic tiles - Definition, classification, characteristics, assessment and verification of constanc...
Norm
ÖNORM EN 14411
2012 11 15
Ceramic tiles - Definitions, classification, characteristics, evaluation of conformity and marking
Norm
ÖNORM EN 14411
2007 06 01
Ceramic tiles - Definitions, classification, characteristics and marking
Norm
↖
ÖNORM EN 14411
2004 07 01
Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998, modified)
Norm
ÖNORM EN 14411
2004 04 01
Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998, modified)
Norm
ÖNORM EN 87
1992 04 01
Ceramic floor and wall tiles - Definitions, classification, carakteristics and marking
Norm
ÖNORM EN 176
1992 04 01
Dust-pressed ceramic tiles with a low water absorption (E up to 3 %) - Group BI
Norm
ÖNORM EN 188
1992 03 01
Ceramic tiles - Extruded ceramic tiles with water absorption of E more than 10% (Group A III)
Norm
ÖNORM EN 121
1992 03 01
Extruded ceramic tiles with low water absorption (E up to 3%) (Group A I)
Norm
ÖNORM EN 177
1992 03 01
Dust-pressed ceramic tiles with a water absorption of E between 3% and 6 % (Group B IIa)
Norm
ÖNORM EN 186-1
1992 03 01
Ceramic tiles - Extruded ceramic tiles with water absorption of E between 3% und 6% (Group A IIa)
Norm
ÖNORM EN 187-1
1992 03 01
Ceramic tiles - Extruded ceramic tiles with a water absorption of E between 6% and 10% (Group A IIb)...
Norm
ÖNORM EN 187-2
1992 03 01
Ceramic tiles - Extruded ceramic tiles with water absorption of E between 6% and 10% (Group A IIb)
Norm
ÖNORM EN 178
1992 03 01
Dust-pressed ceramic tiles with a water absorption of E between 6% and 10% (Group B IIb)
Norm
ÖNORM EN 186-2
1992 03 01
Ceramic tiles - Extruded ceramic tiles with water absorption of E between 3% and 6% (Group A IIa)
Norm
ÖNORM B 3232-1
1990 03 01
Ceramic tiles and plates; terms, definitions and criteria of classification
Norm
Norm
Issue date :
1996 12 01
Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:1994)
Norm
Issue date :
1996 12 01
Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:1994)
Norm
Issue date :
1996 12 01
Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-11:1994)
Norm
Issue date :
1997 12 01
Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995)
Norm
Issue date :
1997 12 01
Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:1995, including Technical Corrigendum 1:1997)
Norm
Issue date :
1997 12 01
Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:1995)
Norm
Issue date :
1997 12 01
Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:1995, including Technical Corrigendum 1:1997)
Norm
Issue date :
2012 04 01
Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010)
Norm
Issue date :
2012 03 15
Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
Norm
Issue date :
1997 12 01
Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles (ISO 10545-15:1995)
Norm
Issue date :
1997 12 01
Ceramic tiles - Part 14: Determination of resistance to stains (ISO 10545-14:1995, including Technical Corrigendum 1:1997)
Norm
Issue date :
1997 12 01
Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:1995)
Norm
Issue date :
1997 12 01
Ceramic tiles - Part 12: Determination of frost resistance (ISO 10545-12:1995, including Technical Corrigendum 1:1997)
Norm
Issue date :
1998 05 01
Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution (ISO 10545-5:1996, including Technical Corrigendum 1:1996)
Norm
Issue date :
1999 12 01
Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles (ISO 10545-7:1996) (Corrigendum)
Norm
Issue date :
1999 05 01
Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles (ISO 10545-7:1996)
Norm
Issue date :
2012 04 01
Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:2010)
Norm
Issue date :
2012 08 15
Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
Norm
Issue date :
1983 11 01
Building construction — Modular coordination — Basic module
Norm
Issue date :
2012 11 15
Ceramic tiles - Definitions, classification, characteristics, evaluation of conformity and marking