Please select and order
€120.67
excl. VAT
Add to cart
Norm

ÖNORM EN 14141

Issue date: 2013 08 01

Valves for natural gas transportation in pipelines - Performance requirements and tests

This European Standard applies to all valves (plug, ball, gate and check valves) used in onshore transmission pipelines for transport of natural gas in accordance with EN...
Valid
This European Standard applies to all valves (plug, ball, gate and check valves) used in onshore transmission pipelines for transport of natural gas in accordance with EN 1594, but with a differing temperature range according to the following three classes in accordance with EN 682: 1) -10 °C to 60 °C; 2) -20 °C to 60 °C; 3) the range stated by the purchaser for special design. This European Standard comprises all valves which are components of the pipeline. This European Standard specifies valves for pipelines with a maximum operating pressure (MOP) over 16 bar. Control valves and safety valves are excluded from the scope of this European Standard. This European Standard specifies requirements and appropriate verification tests carried out during production and for certification purposes to verify that the valves conform to the requirements. A summary of the product and type tests is given in Annex G. This European Standard makes reference to EN 13942. All the requirements of EN 13942 should be met unless otherwise stated. Paragraphs marked with a dot [.] indicate requirements which are identical to EN 13942. Additional national requirements and tests in accordance with individual national legal regulations not yet harmonised may be necessary and are to be advised in the purchase order.
ÖNORM EN 14141
2013 08 01
Valves for natural gas transportation in pipelines - Performance requirements and tests
Norm
ÖNORM EN 14141
2004 03 01
Valves for natural gas transportation in pipelines - Performance requirements and tests
Norm
Norm
ÖNORM EN 10204
Issue date : 2005 01 01
Metallic products - Types of inspection documents
Norm
ÖNORM EN 19
Issue date : 2002 07 01
Industrial valves - Marking of metallic valves
Norm
ÖNORM EN 549
Issue date : 1995 02 01
Rubber materials for seals and diaphragms for gas appliances and gas equipment
Norm
ÖNORM EN 736-1
Issue date : 1995 04 01
Valves - Terminology - Part 1: Definition of types of valves
Norm
ÖNORM EN ISO 5210
Issue date : 1996 06 01
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991)
Norm
ÖNORM EN 1369
Issue date : 2013 01 01
Founding - Magnetic particle testing
Norm
ÖNORM EN ISO 3452-1
Issue date : 2013 10 01
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013)
Norm
ÖNORM EN 1371-1
Issue date : 2012 02 01
Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings
Norm
ÖNORM EN 736-2
Issue date : 1997 11 01
Valves - Terminology - Part 2: Definition of components of valves
Norm
ÖNORM EN 10228-3
Issue date : 1998 08 01
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
Norm
ÖNORM EN 10228-2
Issue date : 1998 07 01
Non-destructive testing of steel forgings - Part 2: Penetrant testing
Norm
ÖNORM EN 10228-1
Issue date : 1999 08 01
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
Norm
ÖNORM EN 12627
Issue date : 1999 09 01
Industrial valves - Butt welding ends for steel valves
Norm
ÖNORM EN 10228-4
Issue date : 1999 11 01
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
Norm
ÖNORM EN 1515-1
Issue date : 2000 04 01
Flanges and their joints - Bolting - Part 1: Selection of bolting
Norm
ÖNORM EN 12982
Issue date : 2009 10 15
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
Norm
ÖNORM EN 1503-2
Issue date : 2001 02 01
Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
Norm
ÖNORM EN 1503-1
Issue date : 2001 02 01
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
Norm
ÖNORM EN ISO 5211
Issue date : 2001 05 01
Industrial valves - Part-turn actuator attachments (ISO 5211:2001)
Norm
ÖNORM EN 1515-2
Issue date : 2002 05 01
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
Norm
ÖNORM EN 682
Issue date : 2006 09 01
Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids (consolidated version)
Norm
ÖNORM EN 12516-3
Issue date : 2004 10 01
Valves - Shell design strength - Part 3: Experimental method (consolidated version)
Norm
ÖNORM EN 12681
Issue date : 2003 07 01
Founding - Radiographic examination
Norm
ÖNORM EN 12266-1
Issue date : 2012 05 15
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
Norm
ÖNORM EN 12516-2
Issue date : 2004 09 01
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
Norm
ÖNORM EN ISO 10497
Issue date : 2010 05 15
Testing of valves - Fire type-testing requirements (ISO 10497:2010)
Norm
ÖNORM EN 12516-1
Issue date : 2005 08 01
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
Norm
ÖNORM EN ISO 10675-1
Issue date : 2013 10 01
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2008)
Norm
ÖNORM EN 736-3
Issue date : 2008 05 01
Valves - Terminology - Part 3: Definition of terms
Norm
ÖNORM EN 13942
Issue date : 2009 11 01
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified + Cor 1:2009) (consolidated version)
Norm
ÖNORM EN 1594
Issue date : 2013 11 01
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
Norm
ÖNORM EN ISO 23278
Issue date : 2009 12 15
Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006)
Norm
ÖNORM EN ISO 23277
Issue date : 2009 12 15
Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006)
Norm
ÖNORM EN ISO 17638
Issue date : 2009 12 15
Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2003)
Norm
ÖNORM EN ISO 148-1
Issue date : 2010 12 01
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009)
Norm
ÖNORM EN ISO 11666
Issue date : 2011 03 15
Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
Norm
ÖNORM EN ISO 17640
Issue date : 2011 06 01
Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels and assessment (ISO 17640:2010)
Norm
ÖNORM EN ISO 17637
Issue date : 2011 04 15
Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2003)
Norm
ÖNORM EN ISO 9712
Issue date : 2013 01 01
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)