Please select and order
€219.54
excl. VAT
Add to cart
Norm

ÖNORM EN 13458-2

Issue date: 2007 09 01

Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing (consolidated version)

Für ortsfeste vakuum-isolierte Kryo-Behälter, die für einen höchstzulässigen Druck von über 0,5 bar ausgelegt sind, sind die Anforderungen festgelegt. Für die Bemessung s...
Valid
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 110 Pages
Language:
German | English | Download GER/ENG
Für ortsfeste vakuum-isolierte Kryo-Behälter, die für einen höchstzulässigen Druck von über 0,5 bar ausgelegt sind, sind die Anforderungen festgelegt. Für die Bemessung sind die notwendigen Berechnungsangaben vorhanden. Bedingungen für die Herstellung sind näher angegeben. Die erforderlichen Prüfungen sind beschrieben. In Anhängen sind zusätzliche Informationen zur Spannungsanalyse, für besondere Werkstoffe sowie über Druckbegrenzungs-Systeme enthalten. Hinweise auf Schutzeinrichtungen für den Außenmantel sind gegeben. Diese ÖNORM EN enthält die Europäische Berichtigung AC:2006, mit der die Bilder 4b), 5, 11, 14, 15, 17, 22, 23, 26, C.2 und F.1 ersetzt und die Legende 2 zu Bild 11, der Bemessungsfaktor zu den Bildern 12c) und 12e) und die Legende zu Bild 13 modifiziert wurden.
ÖNORM EN 13458-2
2007 09 01
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and te...
Norm
ÖNORM EN 13458-2
2007 05 01
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and te...
Norm
ÖNORM EN 13458-2
2003 03 01
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and te...
Norm
Norm
ÖNORM EN 10028-4
Issue date : 2008 02 01
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties (consolidated version)
Norm
ÖNORM EN 10028-4
Issue date : 2009 02 01
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
Norm
ÖNORM EN 10028-7
Issue date : 2008 03 01
Flat products made of steels for pressure purposes - Part 7: Stainless steels
Norm
ÖNORM EN 10216-5
Issue date : 2005 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Norm
ÖNORM EN 10217-7
Issue date : 2005 06 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Norm
ÖNORM EN 12300
Issue date : 2006 10 01
Cryogenic vessels - Cleanliness for cryogenic service (consolidated version)
Norm
ÖNORM EN 1252-1
Issue date : 1998 06 01
Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80 °C
Norm
ÖNORM EN 1252-2
Issue date : 2001 10 01
Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C
Norm
ÖNORM EN 13068-3
Issue date : 2002 03 01
Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
Norm
ÖNORM EN 13133
Issue date : 2000 12 01
Brazing - Brazer approval
Norm
ÖNORM EN 13134
Issue date : 2000 12 01
Brazing - Procedure approval
Norm
ÖNORM EN 13458-1
Issue date : 2002 11 01
Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
Norm
ÖNORM EN 13458-3
Issue date : 2005 09 01
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements (consolidated version)
Norm
ÖNORM EN 13648-1
Issue date : 2009 01 01
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
Norm
ÖNORM EN 13648-3
Issue date : 2003 02 01
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
Norm
ÖNORM EN 1418
Issue date : 1998 03 01
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
Norm
ÖNORM EN 1435
Issue date : 2004 06 01
Non-destructive testing of welds - Radiographic testing of welded joints (EN 1435:1997 + A1:2002 + A2:2003)
Norm
ÖNORM EN 1626
Issue date : 2009 02 01
Cryogenic vessels - Valves for cryogenic service
Norm
ÖNORM EN 1797
Issue date : 2002 02 01
Cryogenic vessels - Gas/material compatibility
Norm
ÖNORM EN 473
Issue date : 2009 01 01
Non-destructive testing - Qualification and certification of NDT personnel - General principles
Norm
ÖNORM EN 875
Issue date : 1995 11 01
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
Norm
ÖNORM EN 895
Issue date : 1995 09 01
Destructive tests on welds in metallic materials - Transverse tensile test
Norm
ÖNORM EN 910
Issue date : 1996 06 01
Destructive tests on welds in metallic materials - Bend tests
Norm
ÖNORM EN ISO 15613
Issue date : 2004 09 01
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
Norm
ÖNORM EN ISO 15614-1
Issue date : 2005 02 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
Norm
ÖNORM EN ISO 15614-2
Issue date : 2005 07 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
Norm
ÖNORM EN ISO 6520-1
Issue date : 2007 09 01
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) (multilingual version: de/en/fr)
Norm
ÖNORM EN ISO 9606-2
Issue date : 2005 04 01
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)