Jetzt auswählen und bestellen
109,76 €
exkl. USt.
In den Warenkorb
Norm

ÖNORM EN 14870-2

Ausgabedatum: 2005 08 01

Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified)

This document specifies the technical delivery conditions for unalloyed or low-alloy steel seamless and welded pipeline fittings for use in pipeline transportation syste...
Gültig
This document specifies the technical delivery conditions for unalloyed or low-alloy steel seamless and welded pipeline fittings for use in pipeline transportation systems for the petroleum and natural gas industries as defined in EN 14161. This document is applicable to welding-end fittings such as elbows, caps, tees, single or multiple extruded headers, reducers, and transition sections made from seamless and welded pipe of unalloyed or low-alloy steels. This document specifies three classes of fitting corresponding to increasing quality requirements in accordance with the technical delivery conditions of ISO 3183 for pipe as indicated in Table 1. This document is not applicable to the selection of the fitting class. This document is not applicable to the materials for, or the attachment of, factory-welded extensions. On-land supply systems used by the gas supply industry are excluded from the scope of this document.
ÖNORM EN 14870-2
2005 08 01
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transporta...
Norm
Norm
ASTM E 112
Ausgabedatum : 1996
Standard Test Methods for Determining Average Grain Size(1. editorial change. Reapproved 2004)
Norm
ASTM E 709
Ausgabedatum : 2008
Standard Guide for Magnetic Particle Testing
Norm
ISO 10474:1991
Ausgabedatum : 1991 12 05
Steel and steel products — Inspection documents
Norm
ISO 11496:1993
Ausgabedatum : 1993 11 11
Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar imperfections
Norm
ISO 12095:1994
Ausgabedatum : 1994 12 15
Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing
Norm
ISO 12096:1996
Ausgabedatum : 1996 05 02
Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections
Norm
ISO 13664:1997
Ausgabedatum : 1997 05 01
Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube ends for the detection of laminar imperfections
Norm
ISO 148-2:2008
Ausgabedatum : 2008 12 09
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines (Corrected version 2008-12)
Norm
ISO 148-3:2008
Ausgabedatum : 2008 12 09
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
Norm
ISO 3834-2:2005
Ausgabedatum : 2005 12 09
Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality requirements
Norm
ISO 6892:1998
Ausgabedatum : 1998 03 05
Metallic materials — Tensile testing at ambient temperature
Entwurf
ISO/DIS 6892
Ausgabedatum : 2007 02 08
Metallic materials — Tensile testing — Method of testing at ambient temperature
Norm
ISO 783:1999
Ausgabedatum : 1999 08 26
Metallic materials — Tensile testing at elevated temperature
Norm
ISO 9712:2005
Ausgabedatum : 2005 02 17
Non-destructive testing — Qualification and certification of personnel (Corrected version 2005-03)
Norm
ÖNORM EN 14161
Ausgabedatum : 2004 05 01
Erdöl- und Erdgasindustrie - Rohrleitungstransportsysteme (ISO 13623:2000 modifiziert)
Norm
ÖNORM EN ISO 15156-2
Ausgabedatum : 2004 10 01
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003)
Norm
ÖNORM EN ISO 15614-1
Ausgabedatum : 2005 02 01
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 1: Lichtbogen- und Gasschweißen von Stählen und Lichtbogenschweißen von Nickel und Nickellegierungen (ISO 15614-1:2004)
Norm
ÖNORM EN ISO 2566-1
Ausgabedatum : 1999 10 01
Stahl - Umrechnung von Bruchdehnungswerten - Teil 1: Unlegierte und niedrig legierte Stähle (ISO 2566-1:1984)
Norm
ÖNORM EN ISO 377
Ausgabedatum : 1997 10 01
Stahl und Stahlerzeugnisse - Lage und Vorbereitung von Probeabschnitten und Proben für mechanische Prüfungen (ISO 377:1997)
Norm
ÖNORM EN ISO 6507-1
Ausgabedatum : 2006 10 01
Metallische Werkstoffe - Härteprüfung nach Vickers - Teil 1: Prüfverfahren (ISO 6507-1:2005)
Norm
ÖNORM EN ISO 7438
Ausgabedatum : 2005 11 01
Metallische Werkstoffe - Biegeversuch (ISO 7438:2005)
Norm
ISO 148:1983
Ausgabedatum : 1983 05 01
Steel — Charpy impact test (V-notch)
Norm
ISO 148-2:2016
Ausgabedatum : 2016 10 12
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
Norm
ISO 148-3:2016
Ausgabedatum : 2016 10 12
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
Norm
ISO 3183-1:1996
Ausgabedatum : 1996 10 17
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
Norm
ISO 3183-2:1996
Ausgabedatum : 1996 03 14
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B
Norm
ISO 3183-3:1999
Ausgabedatum : 1999 04 15
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C
Norm
ISO 3834-2:2021
Ausgabedatum : 2021 04 12
Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality requirements
Norm
ISO 4885:1996
Ausgabedatum : 1996 03 14
Ferrous products — Heat treatments — Vocabulary
Norm
ISO 6892:1998
Ausgabedatum : 1998 03 05
Metallic materials — Tensile testing at ambient temperature
Technische Regel
ISO/TR 7705:1991
Ausgabedatum : 1991 11 14
Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications
Norm
ISO 10474:2013
Ausgabedatum : 2013 06 21
Steel and steel products — Inspection documents
Norm
ISO 11496:1993
Ausgabedatum : 1993 11 11
Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar imperfections
Norm
ISO 12095:1994
Ausgabedatum : 1994 12 15
Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing
Norm
ISO 12096:1996
Ausgabedatum : 1996 05 02
Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections
Norm
ISO 13664:1997
Ausgabedatum : 1997 05 01
Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube ends for the detection of laminar imperfections
Norm
ASTM E 112
Ausgabedatum : 2021 09 01
Standard Test Methods for Determining Average Grain Size
Norm
ASTM E 709
Ausgabedatum : 2021 06 01
Standard Guide for Magnetic Particle Testing